AmplifiersNew
DAMP 4.300HD DAN MK II
Networked power and DSP in a single rack unit.
A 4-channel Class D Dante® amplifier with PFC delivering 4 × 300 W into 8 Ω, 70/100 V operation and a full DSP engine with FIR filtering at 96 kHz / 24-bit in 1U.
- 4 × 300 W @ 8 Ω / 4 × 450 W @ 4 Ω, Class D with PFC
- Dante®, AES/EBU & analogue inputs with auto failover backup
- 2 × 612 W @ 70 V, 2 × 625 W @ 100 V
- DSP with matrix, EQ, delay, FIR and dynamics
- Phoenix and NL4 Speakon outputs
- RS232, RS485, GPIO, TCP/IP and USB control
Applications
- Auditoriums
- Houses of Worship
- Hotels & Convention Centres
- Corporate AV
- Education
Why it matters
Why DAMP 4.300HD DAN MK II
Dante®, FIR processing and input failover for installed systems in just 1U
- 4 × 300 WOUTPUT @ 8 Ω
- 4 × 450 WOUTPUT @ 4 Ω
- 70 / 100 VHIGH-Z OUTPUT
- Dante®NETWORK AUDIO
- 4 kgNET WEIGHT
- 01
Automatic input backup
Fails over between Dante®, AES/EBU and analogue in a user-set priority.
- 02
Class D with PFC
4 × 300 W @ 8 Ω or 4 × 450 W @ 4 Ω across four channels.
- 03
Distributed-line ready
2 × 612 W @ 70 V or 2 × 625 W @ 100 V for distributed systems.
- 04
FIR and full DSP
Matrix, EQ, noise gate, delay, FIR and dynamics at 96 kHz / 24-bit.
- 05
Clean signal path
SNR above 100 dB and THD below 0.1%.
- 06
Compact 1U chassis
Phoenix and NL4 Speakon outputs, IPS display, RS232/RS485/TCP/IP/USB.
Never lose the signal
Input source backup switches automatically between Dante®, AES/EBU and analogue inputs in a user-set priority order.
- Auto failover
- User-set priority
Low-Z and Hi-Z power
4 × 300 W into 8 Ω, 4 × 450 W into 4 Ω or 2 × 900 W bridged, plus 2 × 612 W at 70 V and 2 × 625 W at 100 V.
- 4 channels
- Class D
FIR filtering built-in
FIR, matrix routing, EQ, noise gate, delay, compression and limiting run at 96 kHz / 24-bit with SNR above 100 dB.
- 96 kHz / 24-bit
- SNR >100 dB
96 kHz / 24-bit processing
Every input runs through 96 kHz / 24-bit AD/DA conversion for detailed, transparent sound with THD below 0.1%.
- 96 kHz / 24-bit
- THD < 0.1%
Efficient power with PFC
Class D technology with power factor correction, plus current-limiter, short-circuit and thermal protection.
- Class D with PFC
Technical data
Specifications
Performance
- Type
- 4 × 300 W, DANTE enabled amplifier with DSP & FIR
- No. of Channels
- 4
- Technology
- Class D with PFC
- Rated Output
- 4 × 450 W @4 Ω, 4 × 300 W @8 Ω, 2 × 900 W @8 Ω, 2 × 612 W @70 V, 2 × 625 W @100 V
- Impedance
- 4 Ω, 8 Ω, 70 V, 100 V
- Max Input Level
- +19 dBu
- SNR
- >100 dB
- THD
- <0.1%
- AD/DA
- 96 kHz / 24-bit
- DSP Functions
- Matrix, EQ, Noise Gate, Delay, FIR, Compression, Limiter
Connectivity & Control
- Audio Inputs
- Balanced Analogue, AES/EBU, Dante®
- Input Backup
- Automatic failover (Dante®, AES/EBU, Analogue), user-set priority
- Output Connector
- Phoenix, NL4 Speakon
- Control Inputs
- RS232, RS485, GPIO, TCP/IP, USB 2.0 (Type B)
- Indicators
- Power
- Display
- IPS colour display
Power & Physical
- Protection
- Current Limiter / Short Circuit / Thermal protection
- Power Requirement
- 100 to 240 V AC (50/60 Hz)
- Power Consumption
- 30 W (idle), 345 W (1/8 power @ 4 Ω), 735 W (1/3 power @ 4 Ω)
- Thermal Dissipation
- 100 BTU/h (idle), 410 BTU/h (1/8 power), 460 BTU/h (1/3 power)
- Dimensions
- 483 × 305 × 44.5 mm (W × D × H) – 1U
- Net Weight
- 4 kg
Downloads
- DAMP 4.300HD DAN MK II DatasheetDownload
Accessories
Related products
- New
- New
Dante® power and DSP in one rack unit
DAMP 4.300HD DAN MK II is a Dante® amplifier with DSP, designed for auditoriums and houses of worship. Our team can help you specify the right processing and amplification for your system.
