DAMP 4.300CM

Four channels of efficient power with full DSP.

A 4-channel Class D amplifier with PFC delivering 4 × 300 W into 8 Ω or 2 × 600 W at 100 V, with integrated FIR DSP, comprehensive control and a 1U chassis.

  • 4 × 300 W @ 8 Ω, 2 × 900 W bridged @ 8 Ω
  • 2 × 600 W @ 100 V for distributed systems
  • Class D amplification with PFC for high efficiency
  • Built-in DSP with FIR, matrix, EQ and dynamics
  • RS232, RS485, GPIO, TCP/IP and USB 2.0 control
  • 1U chassis with 320 × 240 IPS colour display

Applications

  • Corporate AV
  • Distributed Audio
  • Retail & Hospitality
  • Education
  • Commercial Spaces

Why it matters

Why DAMP 4.300CM

Reliable, efficient power and advanced DSP control for commercial installations

  • 4 × 300 WOUTPUT @ 8 Ω
  • 4 × 450 WOUTPUT @ 4 Ω
  • 2 × 600 WOUTPUT @ 100 V
  • >97 dBSNR
  • 4.65 kgNET WEIGHT
  • 01

    Built-in FIR DSP

    Matrix, EQ, noise gate, delay, compression and limiting with FIR.

  • 02

    Flexible outputs

    4 × 300 W @ 8 Ω, 4 × 450 W @ 4 Ω or 2 × 900 W bridged.

  • 03

    100 V ready

    2 × 600 W at 100 V for constant-voltage distributed systems.

  • 04

    Class D with PFC

    High-efficiency amplification with >97 dB SNR and <0.1% THD.

  • 05

    Full control

    RS232, RS485, GPIO, TCP/IP and USB 2.0 control inputs.

  • 06

    1U with display

    Compact 1U chassis with a 320 × 240 IPS colour display.

Low-Z and 100 V in one amplifier

Delivers 4 × 300 W into 8 Ω, 4 × 450 W into 4 Ω, 2 × 900 W bridged at 8 Ω or 2 × 600 W at 100 V.

  • 4 channels
  • 4 Ω · 8 Ω · 100 V

FIR filtering built-in

An integrated DSP with FIR filtering tunes loudspeakers precisely, alongside matrix routing, EQ and dynamics.

  • FIR filters
  • Integrated DSP

Complete DSP at 48 kHz / 24-bit

Matrix, EQ, noise gate, delay, FIR, compression and limiting run on board at 48 kHz / 24-bit.

  • 48 kHz / 24-bit
  • >97 dB SNR

Efficient Class D with PFC

Class D technology with power factor correction delivers high efficiency, drawing just 25 W at idle.

  • Class D
  • PFC

Fits any control system

RS232, RS485, GPIO, TCP/IP and USB 2.0 control, plus a 320 × 240 IPS colour display, in a 1U chassis.

  • 1U chassis
  • IPS colour display

Technical data

Specifications

Datasheet (PDF)

Performance

Type
4 × 300 W amplifier with DSP & FIR
No. of Channels
4
Technology
Class D with PFC
Rated Output
4 × 450 W @4 Ω, 4 × 300 W @8 Ω, 2 × 900 W @8 Ω, 2 × 600 W @100 V
Impedance
4 Ω, 8 Ω, 100 V
Max Input Level
+14 dBu
SNR
>97 dB
THD
<0.1%
AD/DA
48 kHz / 24-bit
DSP Functions
Matrix, EQ, Noise Gate, Delay, FIR, Compression, Limiter

Connectivity & Control

Audio Inputs
XLR, phoenix with link out
Audio Outputs
Binding post
Control Inputs
RS232, RS485, GPIO, TCP/IP, USB 2.0 (Type B)
Indicators
Power
Display
320 × 240 IPS colour display

Power & Physical

Protection
DSP limiter, High temperature, DC, Short circuit, back EMF, Peak current limiter, Surge current limiter, Startup delay, Over voltage/under voltage protection
Power Requirement
100 to 240 V AC (50/60 Hz)
Power Consumption
25 W (idle), 340 W (1/8 power @ 4 Ω), 730 W (1/3 power @ 4 Ω)
Thermal Dissipation
85 BTU/h (idle), 390 BTU/h (1/8 power), 445 BTU/h (1/3 power)
Dimensions
483 × 265 × 44.5 mm (W × D × H) – 1U
Net Weight
4.65 kg

Downloads

Four-channel commercial amplifier with DSP

DAMP 4.300CM is an amplifier with DSP, designed for corporate AV, distributed audio and retail and hospitality. Our team can help you specify the right processing and amplification for your system.

DAMP 4.300CM amplifier