AmplifiersNew
DAMP 4.1500HD DAN MK II
Serious power and Dante® control for big rooms.
A 4-channel Class D Dante® amplifier with PFC delivering 4 × 1500 W into 8 Ω, plus 70/100 V operation, FIR filtering and full DSP at 96 kHz / 24-bit in a 2U chassis.
- 4 × 1500 W @ 8 Ω / 4 × 2000 W @ 4 Ω, Class D with PFC
- 2 × 3200 W bridged @ 8 Ω
- 4 × 1225 W @ 70 V, 4 × 1250 W @ 100 V
- Dante®, AES/EBU & analogue inputs with auto failover backup
- DSP with matrix, EQ, delay, FIR and dynamics
- RS232, RS485, GPIO, TCP/IP and USB control
Applications
- Concert Halls
- Auditoriums
- Stadiums
- Houses of Worship
- Hotels & Convention Centres
Why it matters
Why DAMP 4.1500HD DAN MK II
High power, refined DSP and input failover for auditoriums and worship spaces
- 4 × 1500 WOUTPUT @ 8 Ω
- 4 × 2000 WOUTPUT @ 4 Ω
- 70 / 100 VHIGH-Z OUTPUT
- Dante®NETWORK AUDIO
- 13 kgNET WEIGHT
- 01
Automatic input backup
Fails over between Dante®, AES/EBU and analogue in a user-set priority.
- 02
High-power Class D
4 × 1500 W @ 8 Ω or 4 × 2000 W @ 4 Ω with PFC.
- 03
Bridge or line out
2 × 3200 W bridged @ 8 Ω, or 4 × 1250 W @ 100 V.
- 04
FIR and full DSP
Matrix, EQ, noise gate, delay, FIR and dynamics at 96 kHz / 24-bit.
- 05
Open control
RS232, RS485, GPIO, TCP/IP and USB 2.0 control inputs.
- 06
Protected 2U chassis
IPS colour display with current-limiter, short-circuit and thermal protection.
Never lose the signal
Input source backup switches automatically between Dante®, AES/EBU and analogue inputs in a user-set priority order.
- Auto failover
- User-set priority
Low-Z and Hi-Z power
4 × 1500 W into 8 Ω, 4 × 2000 W into 4 Ω or 2 × 3200 W bridged, plus 4 × 1225 W at 70 V and 4 × 1250 W at 100 V.
- 4 channels
- Class D
FIR filtering built-in
FIR filtering, matrix, EQ, dynamics and delay run on the built-in DSP at 96 kHz / 24-bit.
- 96 kHz / 24-bit
- Dante®
96 kHz / 24-bit processing
Every input runs through 96 kHz / 24-bit AD/DA conversion for detailed, transparent sound with THD below 0.1%.
- 96 kHz / 24-bit
- THD < 0.1%
Efficient power with PFC
Class D technology with power factor correction, plus current-limiter, short-circuit and thermal protection in a 2U chassis.
- Class D with PFC
- 2U
Technical data
Specifications
Performance
- Type
- 4 × 1500 W, DANTE enabled amplifier with DSP & FIR
- No. of Channels
- 4
- Technology
- Class D with PFC
- Rated Output
- 4 × 2000 W @4 Ω, 4 × 1500 W @8 Ω, 2 × 3200 W @8 Ω, 4 × 1225 W @70 V, 4 × 1250 W @100 V
- Impedance
- 4 Ω, 8 Ω, 70 V, 100 V
- Max Input Level
- +19 dBu
- SNR
- >100 dB
- THD
- <0.1%
- AD/DA
- 96 kHz / 24-bit
- DSP Functions
- Matrix, EQ, Noise Gate, Delay, FIR, Compression, Limiter
Connectivity & Control
- Audio Inputs
- Balanced Analogue, AES/EBU, Dante®
- Input Backup
- Automatic failover (Dante®, AES/EBU, Analogue), user-set priority
- Output Connector
- Phoenix, NL4 Speakon
- Control Inputs
- RS232, RS485, GPIO, TCP/IP, USB 2.0 (Type B)
- Indicators
- Power
- Display
- IPS colour display
Power & Physical
- Protection
- Current Limiter / Short Circuit / Thermal protection
- Power Requirement
- 100 to 240 V AC (50/60 Hz)
- Power Consumption
- 45 W (idle), 1445 W (1/8 power @ 4 Ω), 3180 W (1/3 power @ 4 Ω)
- Thermal Dissipation
- 155 BTU/h (idle), 1520 BTU/h (1/8 power), 1750 BTU/h (1/3 power)
- Dimensions
- 483 × 460 × 90 mm (W × D × H) – 2U
- Net Weight
- 13 kg
Downloads
- DAMP 4.1500HD DAN MK II DatasheetDownload
Accessories
Related products
- New
- New
- New
High-power Dante® amplification for large venues
DAMP 4.1500HD DAN MK II is a Dante® amplifier with DSP, designed for concert halls, auditoriums and stadiums. Our team can help you specify the right processing and amplification for your system.
